Skip to main content

Worm locomotion with FEM

I have always wanted to do a dynamic locomotion setup, I have tried in the past with wire and sop solver with .... interesting results ;)

With FEM in Houdini 13, the rest attribute is stored on vertices which allows a tetra to change its rest state independently of the surrounding tetras. With this, parts can be expanded and shrunk to get a muscle type action.

I have started with a worm since it is quite simple, the contractions and expansions move back along the worm in a wave, opposing the travel direction. It took quite a bit of tweaking to get him moving at all. One major element of a real worm's action that's missing is the little hairs that grip the ground. I couldn't find a way to change the friction per point so I have gone a bit hacky and multed down v wherever I didn't want the worm to move. I would love to hear if there is a per point friction control!

Here is the video

Houdini 13 FEM Worm locomotion from Sam Hancock on Vimeo.

...and the .hip is here

H15 .hip here, for some reason, setting the rest attribute in the SOP solver no longer worked, I just turned on the rest geo option on the object and bypassed it in the SOP solver ... ?

Comments

  1. This comment has been removed by the author.

    ReplyDelete
  2. This comment has been removed by the author.

    ReplyDelete
  3. Hi, Sam!
    Can I setup dynamic locomotion in Houdini 12.5?
    Goodlike!
    alexparfin@gmail.com

    ReplyDelete
  4. this is amazing, nice work , Are you going to do a worm form dune next ? :)

    ReplyDelete
  5. A sand solver sounds like a can of worms ;)

    ReplyDelete
  6. your .hip files are awesome!! thanks for sharing!!

    ReplyDelete
  7. Oh my god The hip file , It's awesome, thanks for sharing ♥

    ReplyDelete
  8. Hi Sam, this is really good! And thanks for the super hip, really usefull. Just one question ... can you (or sombody) confirm it wors on H14? I cached the geo, but simply it doesn't works as it's supposed to do.
    Cheers!

    Marco

    ReplyDelete
    Replies
    1. Sorry this is so late ... not sure what changed but I updated the file for H15, link above...

      Delete
  9. Hi Sam! This is fantastic. Was wondering if there's a better way to do this for Houdini 17+
    I can't seem to get any movement with the H15 hip file.

    ReplyDelete

Post a Comment

Popular posts from this blog

Cloth tear geometry and shading detail

Been adding geo detail to the torn cloth and shading the additional geo. Shading sure is fun! :) Thickness added to the cloth geo Extrude sides are extruded out again  The second extrusion is done twice, once for the U direction, and once for the V direction. Polyframe is used to get the UV gradient to extrude along, vopsops are used to move the extrudeFront points after extrusion as you can't control the extrusion per point with just a polyExtrude node... The extrusion is done twice so that the two different surfaces represent the opposing thread directions. since my geometry (and therefore tears) are in line with the U and V direction, the effect is not obvious in this case. The extra geo after shading The .hip file below has a slightly newer shader than in the video and the image above, I removed the part of the shader that created the soft ramp for the alpha edge and used just the thread noise instead; it now looks more like: Slightly newer shader than

Wire solver and wire deformer.

Just playing around with the wire solver and deforming wires onto wires... rendered as tube primitives, 2 area lights and an env light, took about an hour to render 2K :/ hipnc is here